24
LSQT1319
When using a DVD-RW disc, select whether to
record in VR format or Video format and then
format the disc. (
l
22, About format types)
When a new DVD-RW disc is used, the screen
shown in the illustration appears.
1
Select [YES], then press the
joystick.
2
Select format type, then press
the joystick.
[VIDEO]:
Video format (Cannot edit or delete scenes)
[VR]:
VR format (Allows editing and deleting of
scenes)
3
When the confirmation message appears
Select [YES], then press the
joystick.
≥
If the disc is formatted, then all the data
recorded on the disc will be erased.
≥
To change the format type, format the disc
again. (
l
71)
≥
Do not touch the recording/playback surface.
≥
If there are scratches, dirt or fingerprints on the
recording/playback side of the disc, images
cannot be recorded or played back normally
and the following phenomena may occur:
j
Recording or playback becomes impossible.
j
Playback image stops momentarily or sound
is interrupted during playback.
j
Block noise appears on playback images.
≥
If there is dirt on the disc, wipe with a damp
cloth and then wipe dry.
≥
Do not attach labels or stickers to discs.
≥
Do not use ballpoint pens or other hard writing
implements to write on a label. Use a soft fiber
pen with solvent ink.
≥
Do not use solvents to clean the disc.
≥
Do not drop, stack, or impact discs. Do not
place objects on them.
≥
Do not use the following discs:
j
Discs that are badly warped or cracked.
j
Irregularly shaped discs, such as heart
shapes.
≥
Do not leave discs in the following areas.
j
In direct sunlight.
j
In very dusty or humid areas.
j
Near a heater.
j
Locations susceptible to significant
difference in temperature (condensation can
occur).
≥
To protect discs, keep them in their cases
when not being used.
When using a new DVD-RW disc
Disc handling
VDR-D50P&PC-LSQT1319_eng.book 24 ページ ２００７年１１月１４日 水曜日 午後５時２１分
