33
Special
Features
Special
Features
Card Features
1
Repeat steps 1 and 2 on page 32.
2
Set POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
VCR position.
3
Press PLAY to start playback of the
cassette tape. And then, press PAUSE
to select an image.
4
Press PHOTOSHOT to record the
desired image to the Memory Card.
• When PHOTOSHOT is pressed in
PLAY or SLOW mode, the screen
goes to STOP mode.
• To playback the images of the
Memory Card, see pages 33~34.
• When Variable Speed Search is
done (see page 29), this feature can
not be used.
5
Repeat steps 3~4 to record another
image to the Memory Card.
Card Features
You can record still images from a
cassette tape to a Memory Card.
3
PLAY Button
Before you begin
• Connect the Palmcorder to a power
source. (See pages 11, 12.)
• Set POWER to OFF before inserting a
Memory Card. (See page 10.)
2
POWER Switch
MENU
Button
JOG KEY
4
PHOTOSHOT
Button
M-CARD Lock
Switch
Playback Still Images
1
Slide the M-CARD Lock Switch to
unlock, then set POWER to M-CARD.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
M-CARD position.
• “PLAY: PUSH PLAY KEY” is
displayed for 10 seconds.
1
POWER Switch
You can view the images on the Memory
Card.
M-CARD Lock Switch
Before you begin
• Connect the Palmcorder to a power
source. (See pages 11, 12.)
• Set POWER to OFF before inserting a
recorded Memory Card.
(See pages 32, 33.)
(Continued on next page.)
Recording images From a
Tape
3
PAUSE
Button
• Memory Card will not work when DV
interface Cable (i.LINK) is connected.
Warning
201_401.32-35.p65
01/01/18, 17:08
33
