27
Camera
Advanced Settings
1
Set POWER to CAMERA.
2
Hold down AUTO/MANUAL for more
than 0.7 second
so that the “MNL”
indication appears in the EVF or the
LCD monitor.
3
Press JOG KEY repeatedly
until
“AWB” appears in the EVF or LCD
monitor.
4
Rotate JOG KEY
to select other
modes. (See mode chart at left.)
• Hold down AUTO/MANUAL for more
than 0.7 second to cancel the
setting.
Mode
AWB
*
3, 4, A, B
JOG KEY
White Balance
Auto White Balance (“AWB”) automatically
maintains optimum color balance in most
lighting conditions. However, when using
Digital Functions, etc., you may get better
results by using the manual adjustment.
1
POWER
Description
Automatically maintains optimum
color balance in most lighting
conditions.
When the source illumination is a
halogen lamp.
When shooting outdoors on a
sunny day.
When shooting fluorescent
light.
The White Balance setting that
was previously set manually.
* For manual White Balance
adjustment:
A.
Rotate JOG KEY
to select “
” .
B.
Point the Palmcorder at a white
object (full-screen) and hold JOG
KEY down until “
” indication stops
flashing.
• If “
” indication flashes when the
Palmcorder is turned on, the previous
manual White Balance setting is in
effect.
In the following cases, the “
”
indication flashes:
• The flashing indicates that the
previously adjusted White Balance
setting is still kept. This setting will be
kept until White Balance is adjusted
again.
• Correct White Balance may not be
attainable manually in poor lighting
conditions.
• When ZOOM is set to 10X or
higher, White Balance cannot be
adjusted.
Note
2
AUTO/MANUAL
• DISPLAY (Menu OSD: p. 107) must be
set to ALL for MF, AE, W.BALANCE,
HIGH SPEED SHUTTER, or IRIS to be
displayed on the LCD or EVF.
• While “MAGICPIX” is displayed on the
LCD or EVF, Manual White Balance is
inoperable.
Note
DV73.p 27-30.p65
2003/06/30, 17:01
27
