Operation manual for Narrow-pitch connectors P4S Shield type
Panasonic Corporation
industrial.panasonic.com/ac/e/
©
Panasonic Corporation 2017
ACCTF24E-1 201710
20
03-5. Detailed precautions for solder rework
(1)
Flux-applying tools
In order to prevent solder from rising to the
contact section, the use of a brush pen type
flux applicator that allows an appropriate
amount of solder to be applied is
recommended.
(
e.g., BON-102F, made by Japan Bonkote Co., Ltd
)
(2)
Selection of soldering iron (for lead-free solder in particular)
Recommendation for
0.4 mm
narrow pitch connectors:
-
Cutter-blade-shaped
iron tip
(BJ7-KF made by Japan Bonkote Co., Ltd.)
- Iron tip with a temperature sensor
-
Temperature-controllable iron tip
In addition, it is necessary to check whether
or not the displayed iron tip temperature
differs from the actual.
Recommended actual iron temperature:
340 to
360˚C
Conventional method:
Dropper type
Recommendation:
Brush pen type
Summary of Contents for P4S
Page 29: ...ACCTF24E 1 201710 2017 ...