Page 6
CAUTION:
Four hole locations for toggle bolts and two or preferably four wood screws must be used to secure a mounting
plate that can withstand the oven's weight.
For easier installation and personal safety, it is recommended that this product be installed by two people.
PREPARATION OF BRACKET ASSEMBLY
Note: Cabinets with recessed bottoms sometimes require filler board to be used to create a flush surface for
the two mounting screws. (Fig. F-2)
3. Fold the template along a “Rear wall” dotted line. Align the center line with center line on the wall and the top
cabinet. Tape the template to the underneath of top cabinet and the wall. (Fig. F-3)
4. Drill pilot holes for top cabinet or rear wall cabinet and 2 support screws on top cabinet.
To support the oven’s weight, bracket must be secured by at least
• Four wood screws on the wall studs ( 2 screws on each side) or
• Two wood screws on the wall studs and 4 toggle bolts through the wall
Fig. F-2
Filter board
Center line
Recessed bottom
Fig. F-3
Center line of wall
Tape
Center line
Template
Taping
INSTALLATION OF BRACKET AND OVEN
G
Fig. G-3
Fig. G-2
Bracket Assembly
B-1
B-2
B-3
B-4
2 wall studs
B-1
B-2
B-3
B-4
one wall stud
Fig. G-1
Exhaust
Damper
mounting screws
Damper blade
opens fully
A
Taggle bolt
Summary of Contents for Over The Range Microwave Oven
Page 8: ......