Operating Instructions
[For assistance, please call: 1-800-272-7033]
97
4.
Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page 70).
•
Clicking [<Back] takes you back to the previous page.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting
Description
Enable Image
Buffer/Transfer
•
Check the box to enable the Trigger setting. Clear the box
to disable it.
Trigger
•
Selecting [Timer] enables the camera to buffer/transfer the
image by timer.
•
Selecting [Alarm 1 or 2] enables the camera to buffer/
transfer the image by alarm signal.
•
Selecting [Motion Detection] enables the camera to
capture/transfer the images when the motion detects
something.
Alarm enable
condition
•
Selecting the method of the detection for an alarm
connected to the External I/O terminal.
•
Select [Rising: GND to Open (High).] or [Falling: Open
(High) to GND.]. [Rising: GND to Open (High).] is the state
that GND pin and pin 1 or pin 2 is left open.
[Falling: Open (High) to GND.] is the state that GND pin
and pin 1 or pin 2 is short-circuited. (See page 145)
Setting
Description
A day of the
week
•
Check the box to enable the day. Clear the box to disable it.
Active Time of
Trigger
•
Select the [Always] option when you do not specify the time
period. If you specify the time period, select the time period
option and set the time period.
Summary of Contents for OneHome KX-HCM110A
Page 173: ...Operating Instructions 173 Index ...
