Panasonic OneHome KX-HCM110A Operating Instructions Manual Download Page 111

Page: 111 / 176

Operating Instructions

[For assistance, please call: 1-800-272-7033]

111

Select the transfer method, and click [Next>].

•

Clicking [<Back] takes you back to the previous page.

•

Clicking [Cancel] takes you back to the Trigger page without saving
changes.

Note

If you transfer image by E-mail or FTP, confirm that the default gateway and
DNS server addresses are assigned correctly (see page 43 and page 48).

Setting

Description

No Transfer, No
Memory
Overwrite

•

If the internal memory is full, the camera stops the buffer.

No Transfer,
Memory
Overwrite

•

If the internal memory is full, the camera deletes the old
images, and continues to buffer the image.

FTP

•

The camera transfers the image to an FTP server (see
page 112).

E-mail

•

The camera transfers the image by E-mail (see page 114).

Summary of Contents for OneHome KX-HCM110A

















































































































































































Search results

Summary of Contents for OneHome KX-HCM110A

Reviews:

Brands by name

Popular brands

Panasonic OneHome KX-HCM110A, Operating Instructions Manual

Search results

Summary of Contents for OneHome KX-HCM110A

Reviews:

Brands by name

Popular brands