Panasonic OmniVision PV-C1321-K, Service Manual, Page: 176 / 232

24
Timer Programming using VCR Plus+
®
System
Channel Setup Preparations
To complete step 4 right, make
a local channel list (see
example below).
You will need the following:
• A normal TV and/or Cable
station line up and the channel
numbers you receive them on.
• A list of Guide (VCR Plus+)
channel numbers for stations you
receive (see TV Guide and
selected newspapers.)
1 Make a 3-column chart.
In the left column, write all station
names you receive.
2 In the middle column, write each
station’s Guide (VCR Plus+)
number (see TV Guide, etc.).
3 In the right column, write the
channel number your TV
receives the station on.
VCR Plus+ System is...
This feature allows you to set most items of a Timer Recording by simply entering a special
code number (PlusCode programming number) found in TV GUIDE and selected newspaper
TV listings.
Initial Setup...
In order to do Timer Programming using VCR Plus+, the Initial Setup (Clock and
Channels) on page 8 to 11 must be done.
Channel Setup...
Since PlusCode numbers assigned to channels (found in TV Guide and selected
newspapers) may differ from channels in your viewing area, you’ll need to enter your
local TV channel number for each corresponding Guide Channel. Once Channel Setup
is done, the correct local channel will be selected when PlusCode numbers are used to
program this unit.
1
VCR Plus+ Channel Setup
[For DSS / Cable Box connection only.]
At first, do Channel Setup Preparations (left).
Press ACTION*
to display MAIN MENU.
SET :
SELECT :
END : ACT I ON
VCR P l u s + CH SET UP
GU I DE CH RECE I VE CH
2
M A I N MENU
CLOCK C H
SET : ACT I ON
SELECT :
VCR
T V
EX I T
LANGUAGE
1)Press to
select “CH.”
2)Press ACTION to
display SET UP
CHANNEL screen.
3
1) Press to select
VCR Plus+ CH SET
UP.
2) Press to display
screen.
ANTENNA : CABLE
AUTO SET
CHANNEL CAPT I ON
WEAK S I GNAL D I SPLAY : OFF
CABLE BOX SET UP
VCR P l u s+ CH SET UP H SET UP
SELECT :
SET :
END : ACT I ON
SET UP CHANNEL
4
1)Press to scroll
up/down the GUIDE
CH column.
2)Press to move
cursor to right column.
3)Press to change
the CABLE CH
number.
4)Press to set VCR
Plus+ channels.
• Repeat step 4 until list
is complete.
VCR P l u s + CH SET UP
GU I DE CH RECE I VE CH
01 01 — —
02 — —
Broadcast or
Cable
Station Name
Channel no.
your TV
receives the
station on
Assigned
Guide
(VCR Plus+)
Channel no.
< EXAMPLE ONLY >
15
20
04
HBO
Nickelodeon
CBS
FOX
33
38
34
11
To Make Corrections
Press
and to move
to error, then to
change, or ADD/DLT to
erase number.
5
Press ACTION three times
to end the setup.