Panasonic OmniVision PV-C1321-K, Service Manual, Page: 161 / 232

9
Initial Setup
VIDEO IN AUDIO IN
POWER VOL CH STOP/EJECT REW/ PLAY/REPEAT FF/ REC TIMER/FM
ACTION
REC ON TIMER PROG TIMER
Reset all unit Memory Functions
When moving unit to a new location, or if a
mistake was made in the Initial Setup
section.
• Make sure a tape is not inserted in the unit.
4
Press CH Key to start
CHANNEL / CLOCK AUTO SET
operation. Settings are performed
automatically. If the setup is
completed, the following screen is
displayed.
2 / 7 / 2001 WED 12 : 00PM
DST : ON
AUTO CLOCK SET
COMPLETED
SETT I NG : CH 1 0
END : PRESS CH UP KEY
If AUTO CLOCK SET IS
INCOMPLETE screen appears, set
the clock using MANUAL CLOCK
SET procedure as below.
PLEASE SET CLOCK BY
PRESS I NG ACT I ON KEY
AUTO CLOCK SET
I S I NCOMPLETE
MANUAL CLOCK SET
If AUTO CLOCK SET was incomplete,
manually set the clock as follows.
SET :
SELECT :
END : ACT I ON
SET CLOCK
DST : ON
SE SELE CT MONTH
1 / / 1 / /
:
1
2
Press ACTION Key on the Remote
to display SET CLOCK Menu screen.
Press to select the month and
press to set. In the same manner,
select and set the date, year, time,
and DST. (Daylight Saving Time)
SET :
END : ACT I ON
SET CLOCK
DST : ON
SE SET COMPLETED COMPLETED
2 / 7/ 2 / 7/
:
2001 2001 WED WED 12 12 00
00PM
3
Press ACTION Key twice to start
CLOCK and exit.
3
1
2
Turn the unit
Power on.
Do “Initial Setup” on page 8.
Press and hold both PLAY and
FF on the unit for more than 5
seconds.
• The power will shut off.
• Please ignore “NO CASSETTE”
warning.
*Important:
if a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.