Panasonic NX-5 series, User Manual

Page: 20 / 26

20
Notes: 1) The model No. with suf fi x “ P ” shown on the label af fi xed to the thru-beam type sensor is the emitter, “ D ”
shown on the label is the receiver.
(e.g.) Thru-beam type sensor emitter: NX5-M10RP , Thru-beam type sensor receiver: NX5-M10RAD
2) The retrore fl ective type sensor with polarizing fi lters may not stably detect specular or glossy objects
through transparent fi lm since light is polarized by the transparent fi lm.
3) The sensing range and sensing object for the retrore fl ective type sensor is speci fi ed for the RF-230 re-
fl ector. Further, the sensing range is the possible setting range for the re fl ector. The sensor can detect
an object less than 0.1m away.
4) The sensing range and hysteresis of the diffuse re fl ective type sensor and narrow-view re fl ective type
sensor are speci fi ed for white non-glossy paper (200 × 200mm) as the object.
5) If slit masks (optional) are fi tted, an object as small as 3 × 6mm can be detected.
6) Make sure to con fi rm detection with an actual sensor before use.
7) By mounting optional interference prevention fi lter PF-NX5- □ , two sensors can be mounted closely.
8) In case the sensor is to be used at an ambient temperature of -15
°C
or less, please contact our of fi ce.
Re fl ector cannot be
placed in this range.
Actual sensing
range of the sensor
0.1m Setting range of
the re fl ector
Re fl ector Re fl ector
5m NX5-RM7 □
is 7m
Sensor