76 CAP ET
O
Capstan motor control voltage supply terminal
When higher than Drive Reference Voltage: Accelerated
When lower than Drive Reference Voltage : Current off
High
PWM=
0V
Low
High
PWM=
0V
77 CYL ET
O
Cylinder Motor Control Voltage Supply terminal
When higher than Driver Reference Voltage: current off
When lower than Driver Reference Voltage: accelerated
However, during Cylinder Off, Max value of decelerated Voltage is as follow.
Normal Control : 3.150V
Cylinder Off: 5.000V
Low
PWM=
5.000V
Low
Low
PWM=
5.000V
78 P.FAIL (L)
I
Power Failure Detection Input terminal
Input = "L", Power Failure Mode
In
In
In
79 S-REEL PULSE
I
Pulse Input terminal from reel sensor
In
In
In
80 T-REEL PULSE
I
Pulse Input terminal from reel sensor
In
In
In
81 VSS
GND
Low
Low
Low
82 EX.FF/REW (L)
I/O
Control Signal Filter Selection Terminal during FF/REW
Control spec shall comply with Mecha FFREW(Hi-Z) output timing.
Set Input when deck enters FF/RRW mode.
During Stop, due to FF/REW stopping process, switch over to STOP3 first, then
STOP is canceled.
However, when starting FF/REW, Filter C addition will be required until it become
high speed. Then monitor the CTL Amp Gain(COH bit 0-2) setting value. When 5(
=60dB) or 7(=70dB), compulsorily, output = Low.
Low
Low
Low
83 UNLOADING (H)
O
Loading Motor Control terminal
shall comply with R4 mecha control spec.
Low
Low
Low
84 LOADING (H)
O
Loading Motor Control terminal
shall comply with R4 mecha control spec.
Low
Low
Low
85 SQPB (H)
I
The distinction results wheter S-VHS or VHS of the playback tape is input in VV
mode.
*Low is input: VHS tape playback.
*High is input: S-VHS tape playback.
Note: When the MESECAM (H) terminal receives "High", above result is invalidated
and the tape is judged to VHS tape playback.
In
In
In
86 FG.AMP.OUT
O Capstan FG Amp Signal Output terminal.
Out
Out
Out
87 FG.AMP.IN
I
Capstan FG signal Input Terminal.
In
In
In
88 GND(A)
-
Analog GND.
-
-
-
89 MESECAM (H)
I
Distinction terminal for the VDIEO SYSTEM.
1.In the VV mode.
*High is input: Playback of a MESECAM recorded tape.
*Low is input: Playback of other than MESECAM recorded tape.
2.In the EE mode.
*High is input: Receiving a SECAM broadcast, or SECAM signal is input.
In
In
In
90 CYL PFG
I
Cylinder P.FG signal Input Terminal.
In
In
In
91 OREF
O Analog Amp 1/2 Vdd Ref Power Output Terminal
Out
Out
Out
92 IREF
I
Analog Amp 1/2 Vdd Ref Power Input Terminal
In
In
In
93 VSS
Unused terminal. Connected to GND.
-
-
-
94 CTL HEAD (-)
I/O Control head ( - )side Input/Output Terminal.
In/Out
In/Out
In/Out
95 CTL HEAD (+)
I/O Control head ( + )side Input/Output Terminal.
In/Out
In/Out
In/Out
96 CTL AMP REF
I
Control Amp Ref Capacitor Connection Terminal
In
In
In
97 PB CTL OUT
O Control Amp Output terminal.
Out
Out
Out
98 5V (A)
-
Analog Amp Power Supply Terminal
-
-
-
99 5V (AD)
-
AD/8 bit DA Ref Power Supply Terminal.
-
-
-
100 T.S. CURVE
I
Input terminal for "S-Curve" of Tuner AFC at channel selecting.
In
In
In
STOP
FF/RE
STOP
STOP
21
00
00
26
28
00
PLA
STO
FF/RE
27
Lo
Hi-Z
Deck
Position
PNO
EX.FF/REW(
Lo
53
NV-VP60GL / NV-VP60GC / NV-VP60GCS
Summary of Contents for NV-VP60GL
