Panasonic NV-VP60GL, Service Manual

Page: 35 / 101

Error Code Error Content Additional error explanation Defect 1 Defect 2 Defect 3 Defect 4
F610 ODC abnormality No permission for command execution DV3.2
(IC8001)
F611 6626 QCODE don’t
read Error
Access failure to seek address in CD series DV3.2
(IC8001)
F612 No CRC OK for a
specific time Access failure to ID data in DVD series DV3.2
(IC8001)
F630 No reply to KEY DET
enquiry (for internal use only)
F631 CPPM KEY DET is not
available till the FILE
terminal (CPPM file system is unreadable caused by
scratches) DISC CPPM
(*1)
F632 CPPM KEY DET is not
available Been revoked or falsified DISC CPPM
(*1)
Disc code
F103 Illegal highlight Position Big possibility of disc specification violation during
highlight display
DISC
HIC Error
F4FF Force initialize failure
(time out) DV3.2
(IC8001)
Micro computer error
F700 MBX overflow When replying message to disc manager
F701 Message command
does not end
Next message is sent before replying to disc
manager
F702 Message command
changes
Message is changed before it is sent as a reply to
disc manager
F880 Task number is not
appropriate Message coming from a non-existing task
F890 Sending message when
message is being sent
to AV task Sending message to AV task
F891 Message couldn’t be
sent to AV task Begin sending message to AV task
F893 FROM falsification FROM
(IC8651)
DV3.2
(IC8001)
F894 EEPROM abnormality Serial
communicat
ion on lone
F895 Language area
abnormality
Firm version agreement check for factory preset
setting failure prevention FROM
(IC8651)
F896 No existence model Firm version agreement check for factory preset
setting failure prevention
F897 Initialize is not
completed
Initialize completion check for factory preset
setting failure prevention
F898 Disagreement of
hardware and software
Unsuitable combination of AV DECORDER,
SDRAM and FLASH ROM (firmware)
F8A0 Message command is
not appropriate Begin sending message to AV task
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
9.4. Last Error Code saved during NO PLAY
Error code Error Content
F0BF 6) Cannot playback because physical layer is not recoginizable
F0C0 8) DVD: Cannot playback because it is not DVD Video/Adio/VR
F0C1 9) DVD: Prohibited by the restricted region code
F0C2 A) DVD: PAL restricted playback
F0C3 B) DVD: Parental lock setting prohibits the playback of the entire title
F0C4 C) VCD: Prohibited because it is in PHOTO CD fromat
F0C5 VCD/CD: Prohibited because it is CDROM without CD-DA
35
NV-VP60GL / NV-VP60GC / NV-VP60GCS