VCR
DVD
Timer recording
DVD
TV
VCR
VPS/PDC
PROG/CHECK
TOP MENU
PROG PLAY
ON :
The station transmits VPS/PDC signals. You must set the timer to the time specified
in the TV magazines. Use the special VPS time the TV magazine may indicate.
The station does not transmit VPS/PDC signals. Try to set the start and stop times
such that the entire film can be recorded even if a programme begins or ends earlier
or later than planned.
- - - :
If start or ending time of a programme are changed, this function synchronises the
beginning and the end of the recording session with the actual beginning and end of
the TV programme by a VPS signal of the respective station.
VPS/PDC function
Automatic selection
SP/LP
If, at the beginning of a timer programme, there is not enough tape remain to complete
it, the SP/LP function will automatically run the tape at LP speed. This ensures that the
entire programme will be recorded. If the LP mode is not enough to 'stretch' the remaining
tape to fit you will not be able to record all of the TV programmes.
D
It is not possible to automatically activate the EP mode.
A:
Checking the timer programme
!
Press
PROG/CHECK
, the Timer recording menu will appear.
Press
PROG/CHECK
again or
EXIT
to quit the menu.
!
Changing or cancelling a timer programme
!
Press
PROG/CHECK
to display the Timer recording menu.
!
Press
to select the entry you wish to edit, press
ENTER
to confirm.
!
Change the entries
, press
ENTER
to confirm.
!
Press
CANCEL/RESET
to cancel the timer programme.
13
Playing back programmed recordings
The unit will rewind to the beginning of the programmed recording and automatically
start playing it back.
D
You can also play back programmed recordings manually.
