Dolby Digital
DTS Digital Surround
MPEG
Lets you change the basic settings or your appliance.
QUICK SETUP
Re-initialise Setting
Resets the appliance to factory defaults. Following reset and initialisation,
press
SETUP
to run the QUICK SETUP utility again.
41
Your equipment
can not decode
the signal
Your equipment
can decode the
signal
Dolby
Digital
DTS Digital
Surround
MPEG
PCM
PCM
PCM
Bitstream
Bitstream
Bitstream
SETUP menus
Dolby Digital / DTS Digital
Surround / MPEG:
Please choose the correct settings
matching your audio system:
Menu Audio
PCM Digital Output
PCM is the standard method used to record digital music signals on Audio CDs. For
reasons of copyright protection the digital output of PCM audio signals may be limited
to 48 kHz/16 bit. Choose [Up to 48 kHz] if the digital audio outlet is used to connect
your player to an amplifier that only processes sampling frequencies of up to 48 kHz.
Change the setting to PCM if the connected equipment fails to decode the relevant
signal. High noise levels may otherwise damage your ears or the loudspeakers.
Adapt the settings to the ratings of your audio system.
Dynamic Range Compression
Available in the Dolby Digital (DVD) format only.
The volume range is compressed by dynamically putting up the level of
soft passages and lowering the level of loud passages.
On-Screen Messages
Menu Language
Menu Display
Select the language of the appliance's menus as appropriate.
Select [Off] to suppress the display of OSD text.
Menu Others
For 96 kHz check the digital-in requirements of your connected device.
28
28