21
Checking the timer programme
!
Press
PROG/CHECK
.
The Timer recording menu appears.
!
Press
PROG/CHECK
again or
EXIT
to quit the menu.
Playing back programmed recordings
The device will rewind to the beginning of the recording
and automatically start playing it back.
!
Press
PROG PLAY
.
Automatic SP/LP selection
A:
If there is not enough tape left at the beginning of a
timer
programme to complete it, the SP/LP function will automatically
run the tape at LP speed.
This ensures that the entire programme will be recorded.
If the LP mode is not enough to ‘stretch’ the remaining tape
to fit, you will not be able to record all of the TV programmes.
D
It is not possible to automatically activate the EP
mode.
VPS/PDC function
(not for VP23)
If a TV programme begins or ends earlier or later than planned,
this function synchronises the beginning and end of the recording
session with the actual beginning and end of the TV programme
through a VPS/PDC signal transmitted by the TV station.
ON :
The station transmits VPS/PDC signals. You must set the
timer to the time specified in the TV magazines. Use the
special VPS time the TV magazine may indicate.
OFF:
If you do not want to use the VPS/PDC signals,
you can turn them off.
- - - :
The station does not transmit VPS/PDC signals. Try to set
the start and stop time such that the entire film can be
recorded even if a programme begins or ends earlier or
later than planned.
Changing or cancelling a timer programme
!
Press
PROG/CHECK
.
The Timer recording menu appears.
!
With
select the entry you would like to edit,
confirm with
ENTER
.
!
Modify entries with
and confirm with
ENTER
.
!
Press
CANCEL/RESET
to delete a recording.
Timer recording
PROG/CHECK
PROG/CHECK
PLAY MODE
PROG
PLAY
