PROG/CHECK
AV ENHANCER
21
Timer recording
Timer recording
1 / 3
Pos Date Start Stop
VPS
PDC
1 ARD 31/12 10:30 11:30 SP ON
1 ARD 31/12 11:30 12:30 SP ON
2 ZDF 31/12 12:30 13:30 SP ON
4 RTL 31/12 13:30 14:30 SP ON
6 VOX 31/12 14:30 15:30 SP ON
-- - - - - - -/ - - - -:- - - -:- - SP - - -
:select
: store
: delete
: exit
ENTER
CANCEL
EXIT
Timer recording
1 / 3
Pos Date Start Stop
VPS
PDC
1 ARD 31/12 10:30 11:30 SP ON
1 ARD 31/12 11:30 12:30 SP ON
2 ZDF 31/12 12:30 13:30 SP ON
4 RTL 31/12 13:30 14:30 SP ON
6 VOX 31/12 14:30 15:30 SP ON
-- - - - - - -/ - - - -:- - - -:- - SP - - -
:
select
:
store
:
delete
:
exit
ENTER
CANCEL
EXIT
The Timer recording allows you to programme the recording time of TV programmes
up to 1 month in advance. Use the on-screen menu to programme a maximum of 16
recordings.
Quitting the timer mode
!
Press
TIMER
, the VCR symbol will turn off.
You can now play back a cassette or make a manual recording. Press
TIMER
again to reactivate the previously entered timer programme.
!
Press
PROG/CHECK
and select a free storage position
.
!
Confirm with
ENTER
.
!
Select a station
, and use to set date, week or weekday
.
!
Then enter start- and stop-time
, .
!
Hold buttons down to change time in 30-minute steps.
!
Select tape speed:
A
(Automatic),
SP
,
LP
,
EP
, .
!
The VPS/PDC settings may be changed with
(does not apply to VP21).
!
Press
ENTER
to save timer programme.
!
Repeat these steps for further recordings you may wish to programme.
!
Press
TIMER
to activate the VCR´s timer mode.
Make sure the VCR symbol is displayed.
D
Do not forget to verify that there is enough tape left. The length of the recording
must not exceed the tape left on the video cassette.
