background image

3

ENGLISH

Normal picture

Small amount

of dirt

Large amount

of dirt

Precautions

Please read these precautions before you
operate this VCR (Line Recording).

Avoid:
– Humidity and dust.
– Extreme heat such as direct sunlight.
– Magnets or electromagnetic objects.
– Touching internal parts of the VCR (Line

Recording).

– Water or some other liquid.
– Lightning. Disconnect the aerial plug from the

VCR (Line Recording) during lightning storms.

– Anything heavy on the VCR (Line Recording).
– Connecting or handling the equipment with

wet hands.

– Using a cell phone near the VCR (Line

Recording) because doing so may cause
noise to adversely affect the picture and
sound.

Do:
– Wipe the VCR (Line Recording) with a clean

and dry cloth.

– Install the VCR (Line Recording) in a

horizontal position.

– Keep the VCR (Line Recording), TV and other

equipment switched off until you have
finished all connections.

Condensation may form in the following
cases:

– The VCR (Line Recording) is brought from

cold surroundings into a well-heated room.

– The VCR (Line Recording) is suddenly

brought from cool surroundings, such as an
air-conditioned room or car, to a place which
is hot and humid.

Note:

– In any of the above-mentioned conditions, do

not operate the VCR (Line Recording) for at
least 1 hour.
This VCR (Line Recording) is not equipped
with a dew sensor.

Dirt on the Video Heads

If the video heads get dirty, pictures will not be
recorded or played back clearly.
(See the following conditions.)

If this happens, clean the video heads with a
commercially available cleaning cassette.
If the problem still persists after performing the
above, contact qualified service personnel to
request assistance.

Summary of Contents for NV-SJ3MK2AM

















Reviews: