Panasonic NV-MX500, Operating Instructions Manual

Page: 17 / 55

Camera Mode
-17-
Digital Zoom Function
This function is useful when you want to record close-up
shots of subjects located beyond a normal zoom range of 1
k
to 10
k
magnification. With the Digital Zoom Function, you
can select a magnification of 20
k
or even to 500
k
.
1
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[D.ZOOM] >> [20
k
] or [500
k
].
≥
20
k
: Digital zooming to 20
k
≥
500
k
: Digital zooming to 500
k
2
Push the [W/T] Lever (29) towards [W] or towards [T]
to zoom in or out.
To Cancel the Digital Zoom Function
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[D.ZOOM] >> [OFF].
≥
For other notes concerning this item, see
-43-
.
Image Stabilizer Function
If the Movie Camera might be shaken while recording, the
camera shake in the image can be corrected.
≥
If the Movie Camera shakes too much, this function may
not be able to stabilize images.
1
Press the [OPTICAL IMAGE STABILIZER] Button (5)
repeatedly until the [
[
] Indication appears.
2
Press the Recording Start/Stop Button (32) or
[PHOTO SHOT] Button (25) to start recording.
MEGA OIS (Optical Image Stabilizer) Function
This function increases the effect. We recommend using
MEGA OIS (Optical Image Stabilizer) Function when
performing Card Photoshot Function.
(26)
(51)
M E N U
PUSH
SHUTTER/IRIS/
VOL/JOG
20
t
W T
D.ZOOM
W T
(29)
MEGA
OPTICAL IMAGE
STABILIZER
(5)
PHOTO
SHOT
(25)
(32)
3
Press the [OPTICAL IMAGE STABILIZER] Button
(5)
repeatedly until the [
[
] Indication appears.
To Cancel Image Stabilizer
Press the [OPTICAL IMAGE STABILIZER] Button
repeatedly until neither the [
[
] nor the [
[
]
Indication appears.
≥
For other notes concerning this item, see
-43-
.
Fade In/Out Functions
Fade In
Fade In brings out images and sounds gradually from a black
screen at the beginning of a scene.
1
Keep pressing the [FADE] Button (7) during the
Recording Pause Mode.
≥
The image fades out gradually.
2
When the image is completely gone, press the
Recording Start/Stop Button
(32) to start recording.
3
Release the [FADE] Button (7) about 3 seconds after
starting recording.
≥
The image reappears gradually.
Fade Out
Fade Out causes images and sounds to disappear gradually,
leaving a black screen at the end of a scene.
1
Keep pressing the [FADE] Button (7) while recording.
≥
The image fades out gradually.
MEGA
MEGA
MEGA
OPTICAL IMAGE
STABILIZER
(5)
MEGA
FADE
(7)
(32)
FADE
(7)
B5-B.book 17 ページ ２００２年８月６日 火曜日 午前１１時３３分