Panasonic NV-MV40GL, Operating Instructions Manual

Page: 11 / 24

11
Playback
Preparations
• Confirm that the VCR is on.
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Insert a recorded video cassette.
• Set [VCR/TV] switch
(22)
to [VCR].
For Normal Playback:
Press [Play]
(25)
.
For Cue or Review Playback:
During playback, tap [Fast Forward]
(24)
or
[Rewind]
(8)
.
• To return to normal playback, press [Play]
(25)
.
• If you press and hold down [Fast Forward]
(24)
or [Rewind]
(8)
, cue or review playback
continues for as long as you keep the button
pressed, and operation returns to normal
playback when the button is released.
For High speed Cue or Review Playback (JET SEARCH):
During playback, tap [Fast Forward]
(24)
or [Rewind]
(8)
twice.
For Still Playback:
During playback, press [Pause/Slow]
(28)
.
• To return to normal playback, press [Play]
(25)
or [Pause/Slow]
(28)
.
For Slow Playback:
During playback, keep [Pause/Slow]
(28)
pressed for 2 seconds or more.
• To return to normal playback, press [Play]
(25)
.
Fast-forwarding or Rewinding the Tape:
Press [Fast Forward]
(24)
or [Rewind]
(8)
in the stop mode.
• To stop fast-forwarding or rewinding, press [Stop]
(9)
.
To Obtain a Higher Speed Rewind (Jet Rewind):
Press [JET REW]
(26)
.
The [J . REW] indication appears on the TV screen and VCR
displays channel position (except when the remaining tape
time indication appears).
• Depending on a cassette or an operating condition, the
rewind speed may change somewhat.
• The tape counter is reset to [0:00.00] when the tape is
rewound to the beginning.
To Stop Playback
Press [Stop]
(9)
.
Notes:
• JET SEARCH, cue, review or slow playback will be
automatically cancelled after 10 minutes, and still playback
after 5 minutes.
• During playback function other than normal playback,
horizontal noise bars may appear in the picture, the colour of
the picture may be unstable, or the picture may be otherwise
distorted.
• When you play back a tape recorded in the LP mode, the
picture may be in black and white.
• When you play back a tape recorded in the EP mode, the
picture and the sound may be unstable.
However, these are not malfunctions.
To Play Back a Recorded Part Repeatedly
Press [REPEAT]
(34)
. The [R] indication
appears on the VCR display.
• A recorded part on the tape must be at
least 15 minutes long.
• When recording over the same location on
a tape, it may not function correctly.
To Cancel the Repeat Playback Mode:
Press [Stop]
(9)
.
NTSC Playback
Tapes recorded in the NTSC system can be played back with
this VCR via a PAL system TV.
• Select [NTSC PB SELECT] from the On Screen Display
according to the colour TV system of the TV. (See page 10.)
• NTSC 3.58 recording requires [NTSC INPUT SELECT] to be
in the AUTO or 3.58 position (see page 10), however if
[NTSC INPUT SELECT] is in this position when recording a
NTSC 3.58 signal, no colour is available for the PAL TV.
Once the recording is completed, you then need to select
[on PAL TV] to view the recording in colour on PAL TV.
• On some TVs, the playback picture may roll up or down.
If your TV has V-HOLD control or equivalent adjustment
function, use it to adjust the picture.
Note for only NTSC Playback on PAL system TV
This function is designed to allow only the playback of tapes
recorded by NTSC signals on a PAL system TV. The NTSC
signal is not completely converted to a PAL signal. For this
reason, images play back by this function cannot be recorded
correctly on other VCRs.
NV‑MV40GL.book 11 ページ ２００３年２月２６日 水曜日 午後５時１１分