Panasonic NV-MV22GN Operating Instructions Manual Download Page 9

Page: 9 / 20

LSQT0879

Playback

Preparations

• Confirm that the VCR is on.
• Confirm that the TV is on and the VCR viewing channel is

selected.

• Insert a recorded video cassette.

For Normal Playback:

Press [PLAY]

(8)

For Cue or Review Playback:

During playback, tap [Fast Forward]

(27)

[Rewind]

(10)

• To return to normal playback, press [PLAY]

(8)

• If you press and hold down [Fast Forward]

(27)

or [Rewind]

(10)

, cue or review playback

continues for as long as you keep the button
pressed, and operation returns to normal
playback when the button is released.

For High speed Cue or Review Playback (JET SEARCH):

During playback, tap [Fast Forward]

(27)

or [Rewind]

(10)

twice.

For Still Playback:

During playback, press [PAUSE/SLOW]

(29)

• To return to normal playback, press [PLAY]

(8)

or [PAUSE/SLOW]

(29)

For Slow Playback:

During playback, keep [PAUSE/SLOW]

(29)

pressed for 2 seconds or more.
• To return to normal playback, press [PLAY]

(8)

Fast-forwarding or Rewinding the Tape:

Press [Fast Forward]

(27)

or [Rewind]

(10)

in the stop mode.

• To stop fast-forwarding or rewinding, press [STOP]

(12)

To Obtain a Higher Speed Rewind (Jet Rewind):

Press [JET REW]

(11)

The [J . REW] indication appears on the TV screen.
• Depending on a cassette or an operating condition, the

rewind speed may change somewhat.

• The tape counter is reset to [0:00] when the tape is rewound

to the beginning.

To Stop Playback:

Press [STOP]

(12)

Notes:

• JET SEARCH, cue, review or slow playback will be

automatically cancelled after 10 minutes, and still playback
after 5 minutes.

• During playback function other than normal playback,

horizontal noise bars may appear in the picture, the colour of
the picture may be unstable, or the picture may be otherwise
distorted.

• When you play back a tape recorded in the LP mode, the

picture may be in black and white.

• When you play back a tape recorded in the EP mode, the

picture and the sound may be unstable.
However, these are not malfunctions.

To Play Back a Recorded Part Repeatedly

Press [REPEAT]

(30)

• Press [STATUS/ NAVI CHECK]

(32)

and the [R

]

indication appears on screen display. (See page 7.)

• A recorded part on the tape must be at least 15 minutes

long.

• When recording over the same location on a tape, it may not

function correctly.

To Cancel the Repeat Playback Mode:

Press [STOP]

(12)

NTSC Playback

Tapes recorded in the NTSC system can be played back with
this VCR via a PAL system TV.
• Select [NTSC PB SELECT] from the On Screen Display

according to the colour TV system of the TV. (See page 8.)

• NTSC 3.58 recording requires [NTSC INPUT SELECT] to be

in the AUTO or 3.58 position (see page 8), however if [NTSC
INPUT SELECT] is in this position when recording a NTSC
3.58 signal, no colour is available for the PAL TV. Once the
recording is completed, you then need to select [on PAL TV]
to view the recording in colour on PAL TV.

• On some TVs, the playback picture may roll up or down.

If your TV has V-HOLD control or equivalent adjustment
function, use it to adjust the picture.

Note for only NTSC Playback on PAL system TV

This function is designed to allow only the playback of tapes
recorded by NTSC signals on a PAL system TV. The NTSC
signal is not completely converted to a PAL signal. For this
reason, images play back by this function cannot be recorded
correctly on other VCRs.

Convenient Automatic Functions

VCR Auto Power On

When you insert a video cassette, the VCR switches on
automatically.

Auto Playback Start

When you insert a video cassette with a broken erasure
prevention tab, playback starts automatically without press
[PLAY]

(8)

VCR-off Playback

When the VCR is off, the inserted cassette can be played
back by pressing [PLAY]

(8)

Auto Rewind

When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
• This function does not work during timer recording, OTR

recording and fast-forwarding.