10
LSQT0880
Recording
Preparations
• Confirm that the VCR is on.
• Confirm that the TV is on and the VCR viewing channel is
selected.
Operations
1 Insert a video cassette with an intact erasure
prevention tab.
• If it has already been inserted, press [VCR-ON/OFF]
(1)
to turn the VCR on.
2 Select the TV station
using [CH]
(20)
.
• It is also possible to select
by pressing [Numeric]
(3)
.
3 Press [REC]
(15)
([REC/
OTR]
(37)
) to start
recording.
4 Press [STOP]
(12)
to stop recording.
To Select the Desired Rec Mode
Press [REC MODE]
(33)
before recording.
• SP provides standard recording time, optimum
picture and sound quality.
LP provides double recording time with slightly
reduced picture and sound quality.
EP provides triple recording time with slightly reduced
picture and sound quality.
When you play back a tape recorded in the EP mode, the
monaural sound may be unstable.
When you start the recording in the EP mode, [EP] indication
on the VCR display flashes for about 8 seconds.
EP mode means Super Long Play (SLP).
To Pause Recording
Press [PAUSE/SLOW]
(29)
during recording.
Press it again to continue
recording.
To View One TV Programme while
Recording Another TV Programme
After pressing [REC]
(15)
to start recording, select on your TV
the programme position of the TV programme that you want
to view.
To Prevent Accidental Erasure of
Recorded Contents
Break out the erasure prevention tab after recording.
If you insert a video cassette with a broken out erasure
prevention tab and press [REC]
(15)
([REC/OTR]
(37)
), the
indication flashes on the VCR display to indicate that
recording is not possible.
To record this video cassette again, cover the tab hole with
two layers of adhesive tape.
To Display the Approximate Remaining
Tape Time
The remaining tape time can be displayed in the VCR display.
1 Select [TAPE SELECT] from the On Screen Display and
select the corresponding video cassette tape length.
See page 8.
2 Press [STATUS/ NAVI CHECK]
(32)
repeatedly until the
Remaining Tape Time appears on the VCR display.
For certain cassettes, the remaining tape time may not be
displayed correctly.
To reset the tape counter
Press [RESET]
(31)
to reset the tape counter (elapsed time)
to [0:00].
• The tape counter is automatically reset to [0:00] when a
video cassette is inserted.
• The tape counter is reset to [0:00] when you operate the Jet
Rewind function and the tape is rewound to the beginning.
Notes:
• When playing back a cassette recorded in the LP or EP
mode, some pictures and sound distortion may occur.
However, this is not a malfunction.
• The recording pause mode will be automatically cancelled
after 5 minutes and return to the stop mode.
• The tape recorded in the EP mode on this VCR cannot be
played back on the other VCR without EP mode function.
• On the other VCR (even with EP mode function), when you
play back the tape recorded in the EP mode, the picture and
the sound may be distorted. However, this is not a
malfunction.
To Record the Present Date and Time
(OSD Recording) on the same screen as
the picture
This function allows you to record the present date and time
on the same screen as the picture being recorded.
Operations
1 Set [OSD REC] to [ON].
(See page 8.)
2 Press [REC]
(15)
([REC/OTR]
(37)
).
3 Press [STOP]
(12)
to stop
recording.
Note:
• This function is also activated for OTR recording and Timer
recording.
SP
SP
LP
SP
SP
SP
SP
REMAIN
2 0 : 1 5 . 5 4
1 6 . O C T . 2 0 0 5
LSQT0880_Eng.book 10 ページ ２００５年２月１６日 水曜日 午後３時３６分
