Panasonic NV-MV21GC, Service Manual

Page: 24 / 86

6. SERVICING POSITION
Install the Mechanism Unit on to the MAIN C.B.A..
Then fix a screw (I), and connect two frexible card Connectors
(Cylinder connector, AC Head connector) and P1531 as shown in
Fig. D5 .
Fig. D8
3.2. MECHANICAL ADJUSTMENT PROCEDURES
Refer to the Service Manual for R4-Mechanism Chassis.
(Order No. VRD0202010C8)
3.3. ELECTRICAL ADJUSTMENT PROCEDURES
This section provides complete adjustment procedures required for electric circuits of VCR.
3.3.1. TEST EQUIPMENT
To perform electrical adjustments following equipment is required.
1. VHS Alignment Tape. (VFJ8125H3F)
2. Monitor
3.3.2. SERVO SECTION
24