2.4.3. REMOVAL OF CASSETTE TAPE
When the cassette tape could not be uninstalled from an electrical malfunction, There are 2
ways to remove a cassette tape.
1. Removal by compulsory unloading.
A. Press FF and EJECT button simultaneously for more than 3
seconds and set the Service Mode to 7.
B. Press STOP button in order to unload the mechanism. (Pay
attention to tape slack)
Service Mode Indication:
7 ** ** (STOP) 7 0L ** (EJECT)
2. Removal by manual operation by rotating the Loading Motor with
the batteries.
A. Disconnect the AC plug, and remove the Top Panel and the
Front Panel by referring to the Disassembly Procedures.
B. Connect three batteries (1.5V spec.) to the Loading Motor in
series for supplying 4.5V to rotate the Loading Motor as shown
in
Fig. S2
.
Fig. S2
10
Summary of Contents for NV-MV21GC
