Panasonic NV-HV62PX Operating Instructions Manual Download Page 16

16

LSQT0878

Confirming the cassette which includes a 
programme you want to watch 
(Jet Navigator Memory)

This allows you to search the cassette which you recorded the 
programme you want to watch without inserting video 
cassette tapes.

Preparations

• Display the VCR picture on the TV.

• You can only search for cassettes recorded in timer 

recording with setting [JET NAVIGATOR] to [ON] 
(See page 8) on this VCR in the past.

1 Press [MENU] 

(9)

 to display the Main menu on the TV 

screen.

2 Press [

43

(28)

 to select [NAVI MEMORY 1

*

PROG.] 

then press [ENTER] 

(26)

.

• NAVI MEMORY Screen appears.
• The programme list for 1 cassette 

is displayed per 1 screen.

• Up to 20 cassettes can be 

selected on this VCR and 
displayed on the NAVI MEMORY 
Screen.

* The number of Jet Navigator Data memorized on this 

VCR is displayed.

3 Press [

2 1

(28)

.

• The display can be switched for each cassette 

(programme list).

To Cancel the NAVI MEMORY Screen:

Press [MENU] 

(9)

.

To Demonstrate the Jet Navigator Function

Keep [NAVI] 

(25)

 pressed for more 

than 5 seconds without inserting a 
cassette tape.

To Cancel the Demonstration of Jet Navigator Function:

Press [MENU] 

(9)

.

To Check the Recorded Programming Data 
(Time Stamp Function)

When playback starts after searching 
with Jet Navigator function or index 
search function, recorded programming 
data (called Time Stamp) appears on 
the TV screen for approx. 5 seconds.

Note:

• Time Stamp does not appear if the beginning of the Jet 

Navigator data is not recorded 10 minutes before and after 
the current tape position even when index signals are 
recorded.

To Find the Beginning of Each Recording
(VHS Index Search System)

This VCR automatically records special index signals on the 
tape every time a recording is started. The Index search 
function makes use of these index signals to let you find the 
beginning of a desired programme quickly and easily.

Index signals are automatically recorded in the following 
cases:

• When you start a recording by pressing [REC] 

(15)

 or [REC/

OTR] 

(39)

.

• When a timer recording starts.
• When you press [REC] 

(15)

 on the remote control during 

recording. 

Conditions for correct operation of the Index search 
function:

• The VCR must be in the stop mode or in the playback mode.
• Each programme recorded on the tape must be at least 

5 minutes long.

Preparations

• Display the VCR picture on the TV.
• Insert a recorded video cassette.

Operation
1 Press [INDEX] 

(13)

 (that corresponds to the direction 

from the current tape position in which the desired 
programme is located on the tape) to start the index 
search. 
For example, if you want to search for the 2nd 
recorded programme in forward direction, press 
[INDEX] 

(13)

 (

L

) twice.

• The VCR fast-forwards or rewinds the tape and searches 

for the specified index signal (the beginning of the desired 
recorded programme). 
When it is found, playback starts automatically.

To Cancel the Index Search or to Stop Playback:

Press [STOP] 

(12)

.

Notes:

• Searching in either direction is possible up to the 20th index 

signal.

• If you press either of [INDEX] 

(13)

 too many times, simply 

press the other [INDEX] 

(13)

 (indicating the opposite 

direction) to correct it. In this way, you can reduce the 
displayed figure down to 1.

• The figure on the VCR display decreases by 1 every time an 

index signal is located.

Finding a Timer-recorded programme for 
viewing (Easy Programme Playback)

Allows you to find a timer-recorded programme with 
One-touch operation and to play it back easily.

Preparation

Set timer recording for the programme you wish to view.

Operation
1 Press [PROG PLAY] 

(21)

.

• As soon as the timer-recorded 

programme is found, playback 
starts automatically.

To Cancel the Easy Programme Playback:

Press [STOP] 

(12)

.

Notes:

• The VCR memorises the position at which timer recording is 

set to the standby mode by pressing [TIMER (REC)] 

(14)

 as 

the start point of Easy Programme Playback.

• If you take out the cassette after a timer recording has 

finished, Easy Programme Playback function does not work.

END : MENU

SELECT :

NO.01 NAVI MEMORY

DATE

CH ON

CATEGORY

10/18

1 10:30

MUSIC

DEMONSTRATION

END : MENU

SELECT : NAVI

NO.01

JET NAVIGATOR

DATE

CH ON

CATEGORY

1/10

2

8:00

MUSIC

1/10

6 19:00

SPORT

1/10

4 21:00

MOVIE

1/10

6 22:00

CHILD

CH   2 10/29.    SA 

ON    20:02

SP

SP

2222

PROG PLAY

LSQT0878.book  16 ページ  2005年3月18日 金曜日 午後6時59分

Summary of Contents for NV-HV62PX





















Reviews: