Panasonic NV-GS60GN Operating Instructions Manual Download

Page: 22 / 48

Record mode

LSQT1174

Backlight compensation function

This protects a backlit subject from being
darkened.

≥

Set to Tape Recording Mode.

Press the joystick to display the icon. Move
the joystick down until icon

appears.

Move the joystick up to select the backlight
compensation icon [

≥

The [BACKLIGHT COMPENSATION ON]
indication appears on the screen of the movie
camera.

≥

The image on the screen will become
brighter.

To return to normal recording

Select the [

] icon again.

≥

The [BACKLIGHT COMPENSATION OFF]
indication appears on the screen of the movie
camera.

≥

If you turn off the power or operate the mode
dial, the backlight compensation is cancelled.

Colour Night view function

This function allows you to record colour subjects
in dark locations to stand out against the
background.
Attach the camera to a tripod, and you can record
images free from vibration.

≥

Only manual focusing can be used.

≥

Recorded scene is seen as if frames were
missed.

Colour night view function

You can record dark locations brightly in colour.

≥

Set to Tape Recording Mode.

Press the joystick to display the icon. Move
the joystick down until icon

appears.

Move the joystick up to select the colour
night view icon [

≥

The [COLOUR NIGHT VIEW ON] indication
appears on the screen of the movie camera.

≥

Each upward press switches the modes.
OFF

Colour night view function

OFF

To cancel the colour night view
function

Select the [

] icon again.

≥

The [COLOUR NIGHT VIEW OFF] indication
appears on the screen of the movie camera.

≥

If set in a bright place, the screen may become
whitish for a while.

≥

The colour night view function makes the signal
charging time of the CCD up to approximately
25

longer than usual, so that dark scenes (a

minimum of 2 lx) can be recorded brightly. For
this reason, bright dots that are usually invisible
may be seen, but this is not a malfunction.

≥

The colour night view function is cancelled when
you turn off the power or operate the mode dial.

LSQT1174ENG.book 22 ページ２００７年１月２９日　月曜日　午後１時２８分

Summary of Contents for NV-GS60GN

















































Search results

Summary of Contents for NV-GS60GN

Reviews:

Related manuals for NV-GS60GN

Brands by name

Popular brands

Panasonic NV-GS60GN, Operating Instructions Manual

Search results

Summary of Contents for NV-GS60GN

Reviews:

Related manuals for NV-GS60GN

Brands by name

Popular brands