Record mode
68
LSQT0892
Check the recording
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
to a recording pause.
≥
Set to Tape Recording Mode.
1
Press the joystick during the recording
pause until the
icon
1
appears
.
2
Move the joystick down to select the
recording check icon [
].
Blank search function
Searches for the last part of the image recorded
(unused part of the tape).
≥
Set to Tape Recording/Playback Mode.
1
Set [BASIC] or [ADVANCE] >>
[BLANK SEARCH] >> [YES].
ª
Stopping blank search midway
through
Move the joystick down.
≥
If the cassette tape has no blank part, then the
camera will stop at the end of the tape.
≥
The camera stops at a point approx. 1 second
before the end of the last image recorded.
When you start recording at that point, the
image can be recorded seamlessly from the last
image.
Recording still pictures onto a card
(Photoshot)
≥
Set to Card Recording Mode.
1
Press the [PHOTO SHOT] button.
ª
To record still pictures clearly
≥
When zooming in on the subject with a
magnification of
4
k
to 10
k
or higher, it is
difficult to reduce the slight shaking from holding
the movie camera by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
≥
When recording still pictures, hold the movie
camera firmly with your hands and keep your
arms stationary at your side so as not to shake
the movie camera.
≥
You can record stable pictures without shaking
by using a tripod and the remote control.
≥
For the number of still pictures to be recorded
on a card, refer to
-102-
.
≥
The sound cannot be recorded.
≥
While data are recorded on a card, do not
operate the mode dial.
≥
When the access lamp is lit, do not insert or
remove a card.
≥
Another product may degrade or not play back
data recorded on this camera.
≥
If set [PICT. QUALITY] >> [
], mosaic-pattern
noise may appear on a playback image
depending on the picture content.
1
PC
PHOTO
SHOT
GS35_25GC.book 68 ページ ２００４年１２月２４日 金曜日 午後２時４７分
