Others
-36-
ª
To Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY] Sub-Menu. (
-13-
)
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ª
To Change the Display Mode
By changing [DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Display Mode to
All Function Display [ALL] and Minimum Display
[OFF]. (
-13-
)
ª
Progressive Photoshot
You cannot use the Progressive Photoshot
Function in the following cases.
≥
Digital Effect Modes in [EFFECT1]
≥
Digital Zoom [D.ZOOM]
≥
1/750 s or faster shutter speed
≥
When brightness is insufficient
≥
When the Night View Function is ON
≥
When the Portrait Mode is used
Initializing the Modes
You can change the Menu settings back to the
shipping condition.
1
Set [INITIAL] >> [INITIAL SET] >> [YES].
≥
The initializing takes a little while.
≥
After the initializing is completed, the
[COMPLETED] Indication appears with
beeps.
≥
Initializing will not erase the clock setting (
-14-
)
that has been adjusted.
Warning/Alarm Indications
If any one of the following indications lights up or
flashes, please check the condition of the Movie
Camera.
3
DEW (DEW DETECT/EJECT TAPE):
Condensation has occurred.
-41-
Y
(CHECK REC TAB/TAPE NOT INSERTED):
You are attempting to record pictures on a
Tape with setting the accidental erasure
prevention slider to [SAVE].
You are attempting Audio dubbing or Digital
dubbing on a Tape with setting the
accidental erasure previntion slider to
[SAVE].
No Cassette is inserted.
-10-
6
(LOW BATTERY):
The Battery is low. Recharge it.
-8-
0
: The built-in battery is low.
-14-
:
(NEED HEAD CLEANING):
The video heads are dirty.
-41-
2
END (TAPE END):
The tape came to the end during recording.
REMOTE (CHECK REMOTE MODE):
Wrong Remote Controller Mode has been
selected.
-7-
UNPLAYABLE TAPE
(OTHER FORMAT):
You are attempting to play back a tape
section that has been recorded with a
different TV system.
UNABLE TO A. DUB
(LP RECORDED):
Because the original recording was done in
LP Mode, audio dubbing cannot be
performed.
INCOMPATIBLE TAPE:
This cassette is incompatible.
PUSH THE
RESET SWITCH:
An irregularity in the mechanism has been
detected. Press the [RESET] Button (
-5-
).
This may solve the problem.
COPY INHIBITED:
Because the medium is protected by a copy
guard, images cannot be recorded
correctly.
CASSETTE DOOR OPENED:
Close the Cassette Compartment Cover
before recording.
Notes and Hints
ª
Concerning the Power Supply
≥
When the Movie Camera is used for a long time,
the Camera body becomes warm, but this is not
a malfunction.
≥
If the [CHARGE] Lamp does not light up
although the Battery is attached to the AC
Adaptor, detach the Battery and reattach it.
ª
Inserting/Removing the Cassette
≥
In the case of using a previously recorded
Cassette, you can use the Blank Search
Function to find the position where you want to
continue recording.
≥
If a new Cassette is inserted, rewind to the
beginning of the tape before starting recording.
≥
When inserting the cassette, make sure it faces
in the right direction and then push it in until it
stops.
≥
When the Cassette Holder is in action, do not
touch anything except the [PUSH] mark.
≥
When closing the Cassette Compartment
Cover, do not get anything caught in the cover,
such as a cable of an optional stereo
microphone.
ª
Alarm Sounds
When [BEEP SOUND] on the [INITIAL]
Sub-Menu on the [TAPE RECORDING MENU] is
33EGE-ENG.book 36 ページ ２００４年２月９日 月曜日 午前９時５５分
