Before using
8
VQT0N43
(42)
Lens hood
In order to remove the lens hood, rotate it
counterclockwise
1
. In order to fit it, put into slot
2
, and then rotate it clockwise.
≥
Fit the MC protector or the ND filter of the Filter
Kit (VW-LF37WE; optional) in front of the lens
hood. Do not fit the other accessories on the
hood.
≥
When fitting the tele conversion lens (VW-
LT3714M2E; optional) or the wide conversion
lens (VW-LW3707M3E; optional), first remove
the lens hood.
≥
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the [W/
T] lever is pressed toward the [W] side, the
4 corners of an image will be darkened.
(Vignetting)
≥
The lens hood has a built-in lens cover.
Fitting the lens cap (optional)
Fit the lens cap to protect the surface of the lens.
If you do not use the movie camera when the MC
protector or the ND filter of the Filter Kit (VW-
LF37WE; optional) is attached to the front of the
lens hood, attach the lens cap to protect the
surface of the lens.
1
Remove the grip belt. Run the end of the
lens cap cord through the hole in the grip
belt attachment part and run the lens cap
through the lens cap cord.
≥
The lens cap removed can be hung on the lens
cap fixture. (It cannot be hung if the grip belt is
used as a hand strap.)
≥
To fit or remove the lens cap, hold both sides of
the lens cap with the tips of your first 2 fingers.
1
2
(42)
GS150_140EB.book 8 ページ ２００４年１１月２７日 土曜日 午後４時５５分
