Before Use
-12-
1
Open the Lock Cover
(31)
by holding the
tabs on both sides
1
, press the Lock
Button
(30)
and detach the Grip Belt.
2
Detach the end of the Grip Belt.
3
Slide
A
to the direction of the arrow and
reattach the Grip Belt.
4
Attach the Grip Belt around your wrist.
≥
When returning the Grip Belt to the Grip Belt
Attachment, press the Lock Cover
2
to ensure
that it is securely locked.
1
(31)
(30)
A
2
Attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1
Pass the end of the Lens Cap Cord through
the hole in the Grip Belt Attachment part
and the Lens Cap through the Lens Cap
Cord.
≥
The removed Lens Cap can be hooked onto the
Grip Belt. (It is not possible when using as a
hand strap.)
≥
When you are not recording, be sure to cover
the Lens with the Lens Cap for protection.
Attaching the Shoulder Strap
We recommend that you attach the Shoulder
Strap before going out of doors to record so as to
avoid dropping the Movie Camera.
1
Pull the end of the Shoulder Strap through
the Shoulder Strap Holder
(52)
on the Movie
Camera.
2
Fold the end of the Shoulder Strap, run it
through the Shoulder Strap Length
Adjuster, and pull it.
≥
Pull it out more than 2 cm
1
from the
Shoulder Strap Length Adjuster so that it
cannot slip off.
120.200B.book 12 ページ ２００４年２月２５日 水曜日 午後４時０分
