Panasonic NV-FJ621B, Service Manual

Page: 53 / 92

No. Port Name I/O Description P-OFF P-Save P-FAIL Reset
91 FLD/T2 DATA OUT O Serial data output terminal for FIP driver and TEST_2(Factory use). Not fix Low Low Low
92 FLD_CS O Chip select terminal for FIP driver. Not fix Low Low Low
93 T.REEL.PULSE I Input terminal for Take-up Reel sensor pulse. In In In In
94 S.REEL.PULSE I Input terminal for Supply Reel sensor pulse. In In In In
95 DAVN I DAVN signal from Slicer In In In In
96 EEP_WR O
Write enable for EEPROM
H:READ only L:Write
High High Low High
97 OSD IIC CLK O IIC clock for EEPROM,I/O and slicer Not fix Low Low Low
98 OSD IIC DATA I/O IIC data for EEPROM,I/O and slicer Not fix Low Low Low
99 MAIN IIC CLK O IIC clock for AV1CHIP,FM audio,Tuner,Decoder and RFC Not fix Low Low Low
100 MAIN IIC DATA I/O IIC data for AV1CHIP,FM audio,Tuner,Decoder and RFC Not fix Low Low Low
101 N.C -- Low fix terminal. Low Low Low Low
102 N.C -- Low fix terminal. Low Low Low Low
103 FG.AMP.OUT O Output from internal FG Amplifier --- --- --- ---
104 FG.AMP.IN I Input for internal FG Amplifier --- --- --- ---
105 GND(A) -- GND --- --- --- ---
106 GND -- GND --- --- --- ---
107 PFG I Cylinder PG/FG input terminal --- --- --- ---
108 OREF O Output from internal reference voltage (2.5V) --- --- --- ---
109 IREF I Input for internal reference voltage --- --- --- ---
110 to GND -- Connect to GND --- --- --- ---
111 CTL.HEAD(-) I Input signal from CTL HEAD(+) --- --- --- ---
112 CTL.HEAD(+) I Input signal from CTL HEAD(-) --- --- --- ---
113 CTL.AMP.REF I Input for internal CTL amplifier reference voltage --- --- --- ---
114 PB.CTL.OUT O Output from internal CTL amplifier --- --- --- ---
115 +5V(A) I 5V input terminal --- --- --- ---
116 +5V(AD) I 5V input terminal --- --- --- ---