Panasonic NV-FJ603EL-K, Service Manual, Page: 4 / 191

PROCEDURES FIP Display Monitor Screen
Press the FF and EJECT keys simultaneously for 3
seconds. None
Press the FF and EJECT keys simultaneously more
twice. None
Press the EJECT key for 3 seconds. None
Press the CH UP key twice. None
Press the POWER key.
(Colon starts flashing)
Service Screen (See
Service Screen (Sample)
Press the REC key on the Remote Controller Unit. Service Screen (See
Service Screen (Sample)
Set the Model Code and Option Code by pressing 10
-key or [RIGHT] [LEFT] [UP] [DOWN] keys on the
Remote Controller Unit. (See Fig. S2) Service Screen (See
Service Screen (Sample)
To release Service Mode, press POWER key and
then press FF or turn the shuttle ring to the FF and
press EJECT key simultaneously 6 times until the
normal indication on the FIP. None
Fig. S1 Service Screen (Sample)
Caution :
Since the “Clock adjust” and “VPS/PDC default” are future
expansion, do not change the initial settings.
Just in case, if these initial setting values had been changed
accidentally, it can be recovered by pressing [UP] [DOWN] keys on
4