Panasonic NV-DS27, Operating Instructions Manual

Page: 21 / 52

21
Cinema Function
This function is for recording in a cinema-like wide screen.
1
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[CINEMA] >> [ON].
≥
Black bars appear at the top and bottom of the screen.
1
To Cancel the Cinema Mode
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [CINEMA] >> [OFF].
≥
For other notes concerning this item, see page 40.
~~~~~~~~~~~~~~~~~~~~~~~~~
Motion Sensor Function
With the built-in Motion Sensor, the Movie Camera senses the subject ’ s
movement and starts recording automatically.
1
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[M.SENSOR] >> [ON].
≥
The Motion Sensor Function Stand-by [STDBY] Indication appears.
≥
When the Movie Camera ’ s Motion Sensor senses a movement in the
screen for approximately 1 second or longer, the Movie Camera starts
recording automatically.
≥
Approximately 10 seconds after the movement in the screen stops, the
recording is automatically stopped, and the Movie Camera resumes the
Motion Sensor Stand-by Mode.
≥
When the Movie Camera stays in the Motion Sensor Stand-by Mode for
6 minutes or longer, the Display turns off. When the Motion Sensor
senses a movement in the screen again, the Display turns back on
automatically and, approximately 4 seconds afterwards, the Movie
Camera starts recording.
To Cancel the Motion Sensor Function during Stand-by
Set [M.SENSOR] on the [CAMERA SETUP] Sub-Menu to [OFF].
To Cancel the Motion Sensor Function during Recording
Press the Recording Start/Stop Button for more than 2 seconds.
≥
For other notes concerning this item, see page 40.
~~~~~~~~~~~~~~~~~~~~~~~~~
0 Lux Night View Function
Your Movie Camera emits infra-red rays so as to record subjects that cannot
be seen with the naked eye.
1
Set the [0 LUX OFF/ON] Switch to [ON] and bring up the
[0LUX] Indication.
≥
Built-in Infra-red Beam Emitters
1
light up. Be careful not to cover
them with your hand during recording.
To cancel the 0 Lux Night View Function
Set the [0 LUX OFF/ON] Switch to [OFF] to turn off the [0LUX] Indication.
≥
The Motion Sensor Function and 0 Lux Night View Function, when used
together, are useful for recording animals at night with no one attending.
≥
For other notes concerning this item, see page 40.
1
FOCUS
W
.B
/SH
UTTER/IR
IS
MF/VOL/JOG
PRO
G.
AE
PUSH
MNL
M
AUTO
MENU
1
STDBY
MOTION SENSOR MOTION SENSOR
REC
FOCUS
W
.B
/SH
UTTER/IR
IS
MF/VOL/JOG
PRO
G.
AE
PUSH
MNL
M
AUTO
MENU
1
0LUX
1
O LUX
OFF
ON
1
B.book 21 ページ ２００１年３月１４日 水曜日 午前１１時２１分