Panasonic NT-P400, Operating Instructions Manual

Page: 10 / 64

EN10
■
Clean the appliance after every use.
■
Before cleaning, be sure to disconnect the power plug from outlet and cool down the unit.
How to Clean
Troubleshooting
● Do not use benzine, thinner, alcohol, bleach, polishing powder, metal brush or nylon
brush, otherwise the surface will be damaged.
Note
Exterior
Wipe with a well-wrung cloth.
Crumb Tray
Wash with diluted dish soap (neutral)
and soft sponge.
Interior
Shake the main body lightly to allow
crumbs inside to fall onto the crumb tray.
To avoid breaking down.
● Do not turn upside-down and shake.
●
Do not insert any instruments into the
insertion slots.
●
Please check the following points
before arranging for service.
Problem Cause and Action
The lever does not lock
when it is lowered.
●
The power plug is not plugged in.
Ü
Plug it in firmly.
●
Toasting bread consecutively.
Ü
Rest the toaster for 1 minute after every 4 cycles.
●
The lever is not lowered.
Ü
Select either button after lowering the lever.
●
The button is pushed more than 30 seconds later
after lowering the lever.
Ü
Select either button within 30 seconds after
lowering the lever.
●
The bread is deformed.
●
The bread is too large or too small.
●
The bread is too thick.
Ü
Lift the lever up manually.
Use the appropriate size of the bread. (P.EN8(
●
The browning control is not set appropriately.
●
Toasting bread consecutively.
●
Rest the toaster for 1 minute after every 4 cycles.
Bread does not pop
up after toasting is
finished.
Toasting color is too
dark or too light.
Defrost and reheat
buttons do not work.