Do not peel the seal on the back.
Do not open/close the doors during
the interior cooling process.
Requests and notices
Please wait until the interior has cooled
down.
●
It may take approximately four hours to
cool down the interior.
It may take 24 hours or more to cool down
the interior and achieve equilibrium in the
summer, etc.
Ice-making starts only after the interior has
been cooled down sufficiently.
●
●
If the door is slanted downwards.
Turn the adjuster bolt on the lower side,
as shown in the diagram on the left, in order
to adjust the level.
●
The freezer/refrigerator doors may tilt
within four to five days after installation
due to the load of the food or adaptation
to the floor surface, turn the corresponding
adjuster bolt with the dedicated tool to
adjust and level the door again to restore.
Otherwise, the cooling
performance may
deteriorate. If you have
peeled it, then cut a
cloth packing tape into
a square and paste it
onto the refrigerator.
Do not open/close the doors
until the interior has cooled
down sufficiently. (Warm air
flowing into the interior will
block the cooling function.)
Seal
5
Installation
06_AUS/NZ_OI_NR-CY54A-EN.indd 5
11/19/2558 BE 10:50
When the door is lowered.
●
Dedicated
tool
Lower the right
adjuster bolt for
the right door.
Lower the left
adjuster bolt for
the left door.
