---- 12 ----
B420M/MS/MW, B480M/MS/MW,
B570M/MS/MW/D/D-*9, B53D2,
B643M/MS/MW/D/D-*9, B703M/MS/MW,
C603D, C703M/MS/MW/D
SECTION IV DISASSEMBLY INSTRUCTION
THERMOSTAT
BIMETAL THERMO., THERMAL FUSE,
FAN MOTOR AND DEFROST HEATER
Take out the ice tray, ice server and freezer shelf.
Remove the screws (2 pcs) which fix the ice tray rail.
Remove a cap and a screw at the right of evaporator cover.
NOTE:
Thermo. dial can not be removed by pulling it toward you.
Remove cap and screw.
Pull the evaporator cover toward you.
Pull the right portion of evaporator cover at first.
Pull the top portion of evaporator cover.
Pull the left part of thermo. cover toward you to remove.
Disconnect the terminals (2pcs.).
Unhook thermo. capillary.
Remove the screws (2pcs.) which fix the thermostat.
Then thermostat and thermo. dial can be removed.
CAUTION
To replace the thermostat
Thermo. capillary should be hooked in plate.
Each part is installed as shown in the figure.
(BIMETAL THERMO., AND THERMAL FUSE)
Pull the bimetal thermo. to the direction of arrow.
Cut binding tube and remove thermal fuse.
To replace bimetal thermostat
Be sure to set bimetal thermostat so that heat sensor.
(Orange wire should be lower.)
Cap
Evaporator Cover
Rib
Rib
Ice Tray Rail
Screw
Thermo.
dial FC
Thermo.
Box
Freezer
Shelf
Connector
Terminal
Thermo. Box
Thermo. capillary
Hook for
thermo. capillary
Binding
tube
Binding
tube
Screw
Screw
Thermostat
Bimetal thermo.
Thermal fuse
Bimetal thermo.
Thermal
fuse
Defrost heater
Screw
Screw