User instructions
12
3.2
Washing programmes
Before starting a washing program make sure that:
•
The water supply tap/valve is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
SPEED PROGRAMMES
Select this option together with any washing program (except the soak program)
to SHORTEN the cycle by from a minimum of 10% to a maximum of 55%,
depending on the cycle selected. To activate this option, press the SPEED button
(light comes on) after selecting the program required. The option is
automatically deactivated at the end of the program.
EXTRA DRY
Function recommended for loads containing items which are difficult to
dry, such as pots, non-stick pans and plastic containers.
HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load.
TABLET DETERGENTS OPTION
Ideal for multi-function detergents, this option allows washing to be
optimised, with full benefits from the combined-action tablets. When this
option is activated, no salt or rinse aid will be used from their relative
containers.
N.B.: When the salt and rinse aid containers are empty, the relative
lights will remain on even if the option is selected.
IMPORTANT:
when no longer required, the option must be deactivated by pressing
the relative button (the light goes out).
If the water hardness has been set on a value above H3, and the option
is activated, the relative light flashes, warning of a setting error.
Multifunction products are not suitable for use with very "hard" water; this
does not prevent the use of the option, but it might not give the best
washing results.
Summary of Contents for NP-B6V1
Page 2: ......
