Panasonic NNS252BF - MICROWAVE OVEN/OTR, Service Manual

Page: 7 / 36

4.1. To set clock
OPERATION SCROLL DISPLAY
1. Plug the power supply cord
into wall outlet. BEFORE USE REFER TO
OPERATING INSTRUCTIONS
2. Press Clock pad.
3. Enter time of day (TOD) by
pressing appropriate
Number
pads.
4. Press Clock pad. TOD has
now been resistered into the
digital programmer circuit and will
count up by minutes.
4.2. Time cooking for two stage
OPERATION SCROLL DISPLAY
1. Place a water load in the oven.
2. Press
Power Level
pad
once to set High power.
(1st stage)
3. Set for 5 seconds by
pressing
Number pads.
5 sec.= 5
4. Press Power Level pad 6
times to set Medium power.
(2nd stage)
5. Set for 1 minute by pressing
Number pads.
1 Min.= 1 0 0
6. Press Start pad.
7. When 1st stage cooking time
has elapsed. Oven beeps twice
and automatically switches to 2nd
stage cooking.
8. When 2nd stage cooking time
has elapsed, oven beeps 5 times
and shuts off. Time of day or colon if set appears
in the display
4.3. Inverter turbo defrost
OPERATION SCROLL DISPLAY
1. Press
Inverter Turbo Defrost Pad.
INVERTER TURBO DEFROST
SET WEIGHT
2. Set the weight for 1 lb by
pressing
Number pads.
1 Ib= 1 0
3. Press Start pad.
4. Press Stop/Reset Pad
twice.Oven shuts off.
Time of day or colon if set appears
in the display.
4.4. Inverter auto cooking
OPERATION SCROLL DISPLAY
1. Press Beverages pad once. BEVERAGES
PRESS SERVING WEIGHT
2. Press Serving/Weight pad
twice to select 2 cups
2 CUPS
3. Press Start pad.
When cooking time has elapsed,
Oven beeps 5 times and shuts
off. Time of day or colon if set appears
in the display.
4.5. Popcorn
OPERATION SCROLL DISPLAY
1. Press Popcorn pad once for
3.5 oz serving.
(Select 3.5, 3.0, 2.85, 2.65, 1.75
oz)
2. Press Start pad.
When cooking time has elapsed,
Oven beeps 5 times and shuts
off. Time of day or colon if set appears
in the display.
4 OPERATION AND DIGITAL PROGRAMMER CIRCUIT
TEST PROCEDURE
7
NN-S262SF / NN-S262BF / NN-S262WF / NN-S252BF / NN-S252WF