Panasonic NNE273SBBPQ, Operating Instruction And Cook Book

Page: 6 / 38

4
1. Switch the oven off before cleaning and
unplug at socket if possible.
2. Keep the inside of the oven, door seals and
door seal areas clean. When food splatters
or spilled liquids adhere to oven walls, door
seals and door seal areas wipe off with a
damp cloth. Mild detergent may be used if
they get very dirty. The use of harsh
detergent or abrasives is not recommended.
3. Your oven cavity is constructed of zinc
coated steel, painted with an extremely
durable coating. After use, the oven interior
should be wiped out to remove any
remaining water in order to reduce the risk of
corrosion to the cavity and door.
The cavity and door can be damaged by
abrasive cleaners and sharp objects so care
must be taken to avoid damage caused in
this way. If the cavity or door become
damaged the lining may begin to corrode.
Providing the above precautions are taken
regarding the cleaning and care of your oven
the life of the cavity and door may be
extended.
4. The outside oven surface should be cleaned
with a damp cloth. To prevent damage to the
operating parts inside the oven, water should
not be allowed to seep into the ventilation
openings.
5. If the Control Panel becomes dirty, clean
with a soft, dry cloth. Do not use harsh
detergents or abrasives on Control Panel.
When cleaning the Control Panel, leave the
oven door open to prevent the oven from
accidentally turning on. After cleaning touch
STOP/CANCEL Pad to clear display window
6. If steam accumulates inside or around the
outside of the oven door, wipe with a soft
cloth. This may occur when the microwave
oven is operated under high humidity
conditions and in no way indicates a
malfunction of the unit or microwave
leakage.
7. It is occasionally necessary to remove the
glass turntable for cleaning. Wash the tray in
warm soapy water.
8. The roller assembly and oven cavity floor
should be cleaned regularly to avoid
excessive noise. Simply wipe the bottom
surface of the oven with mild detergent and
hot water then dry with a clean cloth. The
roller assembly may be washed in mild
soapy water. Cooking vapours collect during
repeated use but in no way affect the bottom
surface or the roller assembly.
After removing the roller assembly from
cavity floor for cleaning, be sure to replace it
in the proper position.
1. Service
WHEN YOUR OVEN
REQUIRES A SERVICE
call your local Panasonic
engineer (08705 357357
Customer Support).
It is hazardous for anyone other than a
competent person to carry out any service or
repair operation which involves the removal
of a cover which gives protection against
exposure to microwave energy.
2. Door Seals
Do not attempt to tamper with or make any
adjustments or repairs to door, control panel
housing, safety interlock switches or any
other part of the oven. Do not remove outer
panel from oven.
The door seals and door seal areas should
always be kept clean – use a damp cloth.
N.B. The appliance should be inspected for
damage to the door seals and door seal
areas. If these areas are damaged the
appliance should not be operated until it has
been repaired by a service technician trained
by the manufacturer.
3. Oven Light
The oven lamp must be replaced by a
service technician trained by the
manufacturer. DO NOT attempt to remove
the outer casing from the oven.
4. Spare Parts
These may be ordered from Customer Care
Centre (08705 357357). Ensure you quote
correct model number.
Care & Cleaning of your Microwave Oven - IMPORTANT
As microwaves work on food particles, keep your oven clean at all times.
Maintenance of your oven