Panasonic NN-SG626W, Q&A

Page: 4 / 7


Make sure that the roller ring and oven cavity floor are clean. Both should be cleaned
regularly. To clean, simply wipe the bottom surface of the oven with a mild detergent,
water or window cleaner and dry. The roller ring may be washed in mild sudsy water or
in a dishwasher. When removing the roller ring from the cavity floor for cleaning, be sure
to replace in the proper position.

If it's an Over The Range (OTR) microwave oven, press the turn table button to set it to
ON mode.
Once the oven is clean, test by microwaving a bowl of water. If the glass tray (turntable) is still
not rotating properly your unit may require service. Check your warranty for repair information.
If you elect to have your unit serviced click
here to locate an authorized Panasonic Service
Center near you
Troubleshooting - The plastic on the display and/or control panel and
door open button of my Microwave is bubbling.
The control and/or display panel and door open button is covered with a removable protective
film to prevent scratches during shipping. Small bubbles may appear under this film, if this is
the case, remove the protective film by applying masking or clear tape to an exposed corner and
pull gently.
If the display and/or control panel becomes wet, clean it with a soft dry cloth, do not use harsh
detergents or abrasives.