English
- Eng-6 -
Feature Diagram
Support Shelf
(only for crispy pan)
Door Hinge
Never put the
fi
nger in.
Water Tank Cover
Evaporating Channel
Water Tank
1. Install the tank in the arrow direction.
2. Pour the water to full mark in the tank.
3. Incorrect installation may cause
leakage of water.
4. Clean the tank and sealed band
frequently.
5. Remove the sealed band may cause
dropping water.
6.
Use distilled water or tap water.
Do not use mineral water.
Control Panel
Oven Door
Warning
(a) The door seals and door seal areas should be cleaned with a damp cloth. The appliance should be inspected for
damage to the door seals and door seal areas and if these areas are damaged the appliance should not be operated
until it has been repaired by a service technician trained by the manufacturer.
(b) It is dangerous for anyone other than a service technician trained by the manufacturer to perform repair service.
(c) If the supply cord of this appliance is damaged, it must be replaced by the manufacturer or its service agent or a similarly
quali
fi
ed person in order to avoid a hazard.
(d) Before use, the user should check that whether the utensils are suitable for use in microwave ovens.
(e) Liquids or other foods must not be heated in sealed containers since they are liable to explode, at the same time it
should avoid the boiling liquids splash.
(f) Only allow children to use the oven without supervision when adequate instructions have been given so that the child is
able to use the oven in a safe way and understands the hazards of improper use.
(g) Accessible parts may become hot when COMBINATION/GRILL/OVEN is in use. Children should be kept away.
Glass Tray
1. Place in the arrow
direction.
2. Drag the glass tray on the
oven window may cause
damage to the window.
3. Never shelve on support
shelf.
Crispy Pan
1. For oven or grill only.
2.
Place directly on the support
shelf only.
3. After cooking, don't touch it by
hand directly to avoid scalding.
Wire Rack
Mitten
After using grill or oven function,
the crispy pan become very hot,
please use the mitten to take it
out in order to avoid scalding.
Ceramic Plate
1. If the ceramic plate is hot, allow cooling down before cleaning.
2. Do not cook directly on the ceramic plate. Always put the food in the container or rack.
External Oven Air Vents
Door Safety Lock System
Drip Tray
1. Install the Drip
Tray at the rubber
feet before using.
2. Clean and wipe to
dry after using.
3. After cleaning,
re-install the plate
back to the rubber
feet.
External Oven Air Vents
Caution Label
Ceramic Cover
1. Install over the evaporating
channel.
2. After using steam function, do
not touch the ceramic cover to
avoid scalding.
3. Clean after cooling down.
Identi
fi
cation Plate
IP1589_38S80KP_Eng_06_071227.indd 6
IP1589_38S80KP_Eng_06_071227.indd 6
2007-12-27 Good Tom 15:50:09
2007-12-27 Good Tom 15:50:09
