English
- Eng-27 -
Before Requesting Service
PROBLEM
POSSIBLE CAUSE
REMEDY
Oven will not turn on.
The oven is not plugged in securely.
Remove plug from outlet, wait 10 seconds
and re-insert.
Circuit Breaker or fuse is tripped or
blown.
Contact the speci
fi
ed service center.
There is a problem with the outlet.
Plug another appliance into the outlet to
check if the outlet is working.
Oven will not start cooking.
The door is not closed completely.
Close the oven door securely.
Start
button was not pressed after
programming.
Press
Start
button.
Another program has already been
entered into the oven.
Press
Stop/Reset
pad to cancel the
previous program and program again.
The program has not been entered
correctly.
Program again according to the Operating
Instructions.
Stop/Reset
pad has been pressed
accidentally.
Program oven again.
"HOT" appears in the display
window.
The cavity is overheated.
Operate again after it cools down.
"U14" appears in the display
window.
The water tank is empty.
Full it with water.
"H00" or "H02" appears in
the display window.
The oven is defected.
Contact the speci
fi
ed service center.
"DEMO MODE PRESS ANY
KEY" appears in the display
window.
The oven is under demonstration
mode.
Press
Timer/Clock
pad 4 times to exit the
mode.
The "
" and "
"
appears in the display
window.
The Child Lock was activated by
pressing
Start
button 3 times.
Deactivate Lock by pressing
Stop/Reset
pad 3 times.
The oven stops cooking by
microwave and "H97" or
"H98" appears in the display
window.
This displaying indicates a problem
with the microwave generation
system.
Please contact an authorised Service
Center.
If it seems there is a problem with the oven, contact an authorized Service Center.
IP1589_38S80KP_Eng_06_071227.indd 27
IP1589_38S80KP_Eng_06_071227.indd 27
2007-12-27 Good Tom 15:50:13
2007-12-27 Good Tom 15:50:13