4.6.2. To replace convection fan motor
1. Remove 1 nut holding convection fan blade, then remove
convection fan blade.
2. Remove 3 screws holding convection fan bracket.
3. Remove 2 screws holding convection fan motor.
4.7. Pump
1. Draw out water tank (U) from drip tray.
2. After removing the water tank, select the "drainage"
function to drain the water remaining in the water pipes and
tubes into oven cavity forcibly. (Operating method: Tap
[Auto Steam] 9 times until F1 Drain water program appears
in the display). Then wipe up the oven cavity.
3. Disconnect 1 connector from the pump motor.
4. Remove 4 screws fixing water tank holder on the bottom of
base plate.
5. Press the tab by using a flathead screwdriver (through the
hole at a 45° angle) to release catch hook.
Then remove the whole water tank holder.
23
NN-CS894S
Summary of Contents for NN-CS894S
Page 2: ...2 NN CS894S ...
Page 3: ...3 NN CS894S ...
