17. Remove 2 screws holding convection motor on convection
fan bracket.
4.12. Circuit breaker
To install the circuit breaker on the cover
NOTE:
1. Ensure the circuit breaker is in right direction as shown
in above ILL (Do not install inversely).
2. Before tighten 2 screws, draw the circuit breaker
harness(U) in and out slightly to confirm if the lead wire
is pressed.(If the lead wire is pressed, the cladding of
wire might be damaged and will cause electric shock.)
3. Make sure that the same side input and output lead
wires are same colour while connecting the terminals
(the left side lead wires are blue). Do not mix up.
19
NN-CS596S
Summary of Contents for NN-CS596S
