Panasonic NI-GT150, Operating Instructions Manual

Page: 16 / 59

16
English
three consecutive beeps are sounded to remind that the
product needs to be cleaned. At this time, the product
enters the cleaning mode automatically.
• To switch the product back to the enhanced steam
level, press and hold the power button for about 8
seconds until three consecutive beeps are sounded
to indicate that mode switching is completed (the eco
steam level indicator turns on and a beep is sounded
when you press and hold the power button for about 4
seconds).
4.Press and hold the steam button. The scale and impurities
inside the main body are ejected from the soleplate together
with a large amount of steam and water.
5.When no steam or water is ejected from the soleplate or
after about 1 minute, the power indicator becomes steady on
from flashing and three consecutive beep are sounded. At
this time, the product switches to the enhanced steam level,
indicating the end of this cleaning process.
After wiping the soleplate clean, place the iron on the heat-
insulation pad correctly and lock it securely, and then press
and hold the power button to power off the product.
6.Bundle and place the corded hose and power cord in the
cord storage space and store the product in a safe place.
Cleaning
◆
Cleaning the main body
For stubborn stains, use a soft cloth dipped with neutral
detergent to clean the surface of the main body.
◆
Cleaning the soleplate surface
If glue or the like sticks to the soleplate surface, wipe it with a
wet cloth.
◆
Cleaning steam vents
If scale appears on steam vents, remove the scale with a
wooden or bamboo toothpick and then wipe the soleplate with
a wet cloth.
◆
Automatic cleaning
1. Place the power base on a stable surface.
2. Take out the detachable water tank and inject water through
the water inlet. Then attach the detachable water tank
onto the power base correctly. Push it until a click sound is
heard.
3.
◎
While the product is powered on, press and hold the
power button for about 8 seconds until the power
indicator starts flashing and three consecutive beeps are
sounded, indicating that the product has switched to the
cleaning mode.
• In the cleaning mode, if you press and hold the power
button for about 4 seconds, a beep is sounded and the
eco steam level indicator turns on. If you release the
power button at this time, the product enters the eco
cleaning mode, the eco steam level indicator is steady
on, and the power indicator keeps flashing.
◎
When the product has been used for up to 2,160 minutes
accumulatively, the power indicator starts flashing and