Panasonic NI-GT150, Operating Instructions Manual

Page: 13 / 59

English
13
After about 1 minute, three consecutive beeps are sounded
and the power indicator becomes steady on from flashing,
indicating that the cleaning is completed and the product is
switched to the enhanced steam level.
• During cleaning, you can switch the product back to the
enhanced steam level by pressing and holding the power
button for about 8 seconds until three consecutive beeps
are sounded to indicate that mode switching is completed
(the eco steam level indicator turns on and a beep is
sounded when you press and hold the power button for
about 4 seconds).
Alternatively, you can stop the cleaning process by pressing
the power button to restart the product.
◆
Iron lock
When the iron is placed on the heat-insulation pad, press the
iron lock to lock the iron onto the power base.
◆
Unlock button
Press the unlock button to unlock the iron.
◆
Cord storage space
When the product is not in use, the corded hose and power
cord can be stored in the cord storage space.
How to use
First use
1. Remove the label on the product.
2. Set the temperature selector of iron by following the
instructions for “Steam ironing”, and then iron a wet cloth for
a few minutes to clear the residue from the soleplate.
level indicator turns on after about 4 seconds, and the
power indicator starts flashing and the eco steam level
indicator turns off after about 8 seconds.
• In the cleaning mode, if you press and hold the power
button for about 4 seconds, the product enters the eco
cleaning mode, the eco steam level indicator is steady on,
and the power indicator keeps flashing.
To power off the product, press the power button to
disconnect the power supply.
◆
Steam button
Press the steam button to iron with steam.
• Water may leak when the iron sprays steam at the
beginning. Please set the temperature selector to "Wool"
or above or rest the iron on the power base for about 15
seconds.
◆
Water shortage indicator
When the water level of the detachable water tank drops too
low, the water shortage indicator will turn on to remind you of
insufficient water of the detachable water tank. In this case,
disconnect the power supply, remove the detachable water
tank, inject water into the detachable water tank through the
water inlet and install the detachable water tank back into the
main body. Then the water shortage indicator will turn off and
the product can start to work properly again.
◆
Automatic cleaning
When the product has been used for up to 2,160 minutes
ac-cumulatively, the power indicator starts flashing and three
con-secutive beeps are sounded to remind that the prod -
uct needs to be cleaned. At this time, the product enters the
cleaning mode automatically. Please follow the instructions for
“Automatic cleaning” in “Cleaning”.