English
12
13
English
To maintain optimal steam performance, it is important to
remove scales and impurities inside the appliance regularly.
It is recommended to perform the easy rinse calc-clean process
at least once a month.
Cleaning and Maintenance of the steamer head and power
base and the hose.
Unplug the power plug, wait until the steamer head,
steamer holder and power base have fully cooled down.
Wipe the surface of the nozzle
and the power base with a soft cloth.
For stubborn stains, use a soft cloth
dipped with neutral detergent to clean.
Remove the hose, clean up stains at
the hose interface and with the base
and the pole.
CLEANING
SPECIFICATION
Rated
voltage
Power
220 V
50-60 Hz
1 800 W
Weight
Approx. 3.2 k
g
Dimensions (assembly) (WxDxH) Approx. 24 x 24 x 166 cm
Corded steam hose
length
Approx. 1.2 m
Water tank capacity
Approx. 2 L
Thermostat system
Temperature fuse
This product is intended for household use only.
Model
NI-GSE050
NI-GSE040
Plug / Cord length
Single-phase three core plug /
Approx. 1.5 m
Steam selector
2-Level steam
1
600 W
Unplug the power plug, wait until the steamer head,
steamer holder and power base have fully cooled down.
Remove the telescopic pole, hose, and water tank from
the power base.
Pour the water in power base out from the hose hole (as
shown in the figure).
Place the power base on a horizontal
place, install the water tank containing
water on the power base, leave them for
about 10 seconds, and then
remove the water tank.
Pour the water in power base
out from the hose hole (as shown
in the figure).
SCALES CLEANING
1
2
3
1
2
3
4
5
Hose hole
TROUBLE-SHOOTING GUIDE
Problem
Causes
Solution
Do not bend the hose.
T
he
ho
se
fo
rms a U-s
h
ape.
Th
e product
p
r
od
u
ces a
water noise.
The telescopic
pole slips down
unexpectedly
Lighten the weight loaded to the fixing hook
(less than 2 k
g
).
The garment on the hook is too heavy.
Water leaks out
from the power
base
Close the cap correctly .
The cap is loose.
The hose is bend.
Straighten the hose.
Th
e product
p
r
od
u
ces
no
steam
or irr
eg
u
la
r
steam.
Insert the power plug and be sure to press
the power button.
The power plug has not been plugged in or the
power button has not been pressed down.
Attach the water tank and hose to the power
base correctly.
The water tank and hose is not be installed
correctly to the power base.
Lift up the steamer head vertically and straighten
the hose
，
to make condensate water backflow.
Condensate water that produced from steam
remains in the hose.
Fill the water tank with water.
The water tank is empty or less than
“
” line.
If you can not solve your problem according to the above solutions.
Have your product repaired by the specified service agent.
220-240 V
50-60 Hz
1
345-
1
600 W
1 500-1 800 W
Vietnam
UAE/Kuwait
/Oman/Saudi
Vietnam
UAE/Kuwait
/Oman/Saudi
