Trouble shooting
Possible solution
Error codes
Condensed
water full
The door is open
- During operation, the drum light can be turned on by
touching any button other than the Power supply and
Start/pause buttons.
- After the operation is completed, the dryer will be
automatically turned off, and the drum light will be turned
on again after the dryer door is opened.
- Whether the dryer case is installed on a flat and solid
ground? Is the adjustment foot locked?
- Whether heavy clothes are unevenly positioned, please
place clothes evenly.
- Whether too many clothes are put in?
- Whether metal foreign objects such as hairpins are
entrapped?
●
Whether the condensed water box is full?
→
Empty the condensed water out of the condensed water
box and restart the dryer.
(Refer to page 21)
●
Whether the drain hose is installed properly?
→
Please install the drain hose correctly and restart the dryer.
(Refer to page 11)
●
Whether the door is opened during the operation of the dryer?
→
Restart after closing the door.
→
Appropriately reduce clothes to be dried.
If the problem occurs repeatedly, please contact after-sales
services.
→
In case of a sign with H such as “H93”,
Please remove power plug from socket and contact
after-sales service.
→
Clean filter and restart.
If the problem occurs repeatedly, please contact after-sales
services.
→
Whether the ambient temperature is below 0°C? Transfer to
a temperature of 5~35 °C for use.
If the problem is happening repeatedly, please contact after-sales
services.
- When the dryer door is opened, the light in the inner
drum will be lit for 30 seconds, then automatically off. To
light it again, please close the dryer door and open it
again.
The light in the inner
drum is off.
The light in the inner
drum is not on.
Abnormal sounds and
serious vibration occur.
Problem
The filter is blocked
or the motor failures
The ambient
temperature is
abnormal
29
30
