Trouble shooting
When the clothes drying effect is not good
Under such
circumstances
What to do
Problem
Possible solution
Deformation of
clothes
There is cotton
lint on the
clothes
Clothes are
wrinkled
- Some clothes can be washed but are not suitable for
drying.
- Before drying, please check the laundry symbols on the
clothes.
- Please confirm whether the filter is cleaned before putting
in clothes.
- Please separately dry clothes that are prone to generate
lint or are prone to be stained with lint.
- Confirm there are no articles in clothes pocket.
- Select the right drying program as per the type of clothes.
- Whether there are too many clothes in the drum.
Some clothing
has residual
moisture
There is a smell
- Reduce the amount of laundry for drying.
- Turn the clothes over, then try drying them again.
- Please dry clothes of similar thickness together.
- When there are smelly articles such as strong detergent,
paint or varnish around, smell may enter the dryer with
accompanying air. If there is such smell in the air, please use
the dryer after ventilating.
The dryer does not work
- Power failure, blown fuse, or circuit breaker tripped.
- The power plug is potentially not properly inserted into
power socket.
- Whether power supply is turned on?
- Whether the “Start/Pause” button is pressed?
- Whether dryer door is properly closed?
- Settings cannot be changed during drying. If it is
necessary to change the settings, please turn off the dryer,
and restart it for setting.
- Whether the child lock is turned on? (Refer to page 14)
- This is not a failure; when the “Easy Iron” function is set,
the inner drum rotates slowly and intermittently.
- When rinsing clothes, addition of fabric softener for
rinsing clothes can reduce electrostatic charge.
- The remaining time is continuously calculated and
adjusted during operation. Therefore, the displayed time
may change.
- This is normal; it is a change caused by the on/off of the
compressor and the drainage pump.
- This is not a failure; it is used to remind the user that
drying is completed, but the temperature in the inner drum
is high, and air will be supplied for cooling for 3 hours at
maximum.
- The indicator light may flash even after the filter is
cleaned. this is not a failure; at the end of the drying
process, the filter clogging warning light will flash to
remind the user to clean the filter.
The buttons do not
work
Intermittent operation
Synthetic clothes
generate static
electricity after drying.
The filter is not blocked,
but the light for filter
still flashes.
The remaining time
displayed changes.
The running
sound changes.
Display of “ ” after
the program is
completed.
27
28
