26
27
Tools
Check memory
Memory list
Saved cooking contents, beep, and memory lock setting, etc. are displayed in order every
4 seconds.
Memory cooking contents
(
In the case of two-digit display: 00–99)
(pp.36–37)
O
To call up a particular memory number to confirm, see
below.
O
If you change the Turn back buzzer to ON (p.52), the
Turn back buzzer screen appears.
(Default setting: OFF)
Beep settings
(p.24)
Memory lock
(p.27)
Magnetron interval
(p.46)
Maintenance interval
(p.46)
O
Returns to the
initial screen.
O
In order to call up a particular memory number to confirm, press the Stop/Reset pad while the display is
changing, then tap
Change number
, enter the memory number, and tap
OK
. The memory contents are
displayed by pressing the Start pad.
(e.g.: To call up memory number 52)
Continues to display
the contents of
subsequent memory
numbers.
How to Operate the Touch Screen
SD Checksum
Use to confirm whether the contents of multiple SD Memory Cards are the same.
The memory contents in the SD Memory Card are displayed as four-figure alphanumeric characters.
If the alphanumeric characters are the same, the memory contents of those SD Memory Cards are the same.
Q
To confirm the memory cooking data
(e.g.: 3550)
O
Returns to the initial
screen after 3 seconds.
Q
To confirm the beep, memory lock data etc.
(e.g.
:
03C4)
O
Since the screen
changes quickly,
it is hardly
possible to catch
the above
screen.
O
Returns to the initial
screen after 3 seconds.
Memory lock
You can choose memory lock ON or OFF.
O
Memory lock
needs to be set every time.
(Default setting: OFF)
O
The oven returns to the
initial screen after
displaying the settings for
3 seconds.
O
Press Start pad for
2 seconds (beeping),
and press Start pad
3 times (beeping).
O
Select
ON
or
OFF
, and tap
OK
.
Notes
Q
When the memory lock is ON
O
Memory cooking starts automatically after you select a memory number even without pressing the Start pad.
O
Memory cooking
and
Change settings
are not displayed.
Q
When the memory lock is OFF
O
Memory cooking starts when you press the Start pad after entering the memory number.