Panasonic NE-SCV2BPQ, Service Manual

Page: 73 / 86

73
NE-SCV2BPQ
12.23. Top Heater
1. Remove the Cabinet. (See "12.1 Cabinet")
2. Open the door.
3. Remove the Heater support, Hot air guide B and the Hot
air Guide E from the top interior surface of the oven. (1
screw each)
4. Remove the Top heater. (Black arrows: 2 screws; White
arrows: 2 nuts)
* During assembly, install the Top heater so that its
terminal tabs point towards the top surface of the oven.
12.24. Antenna U / Spacer
1. Remove the Cabinet. (See "12.1 Cabinet")
2. Open the door.
3. Remove the Shelf.
• Insert a driver into the driver hole on the left side of the
oven, and push the driver tip up to raise the tray. (Hole
diameter: Approx. 8mm)
4. Remove the Antenna U from the shaft of Antenna Motor.
5. Remove the Spacer.
• Align the hooks on Spacer to the respective mounting
holes to remove. (4 places)